Plug and Play 3 BAR MAP sensor for GEN 3 LS Truck Style Intakes. 4.8L, 5.3L, 6.0L, LQ4 LQ9 L33 LM4 LM7 L59 LR4. These sensors will also fit many other GM truck setups, such as the L18 8.1L, L30 5.0L, L31 5.7L and many many more.
Same scale as Holley 554-107 0-315 KPA. This sensor reads up to 31lbs of boost!!
Compatible with Holley Terminator X, Terminator X Max, HP, and Dominator, as well as many other aftermarket and stock EFI Systems.
These sensors are electrically potted for EXTREMELY HARSH CONDITIONS. That means they are filled with a special electronic epoxy that encases all the components of the internal circuitry. This sensor is 100% Guaranteed not to leak, or blow apart in any situation. It takes a pretty hard hit with a hammer to damage these sensors. Trust me, we put them through some rigorous testing!
This sensor is designed for the Gen 3 LS TRUCK style intakes. It will NOT clip into the retaining slots of an intake designed for the CAR style sensors. The 3 BAR MAP sensors for the car style intakes can be found here! If you have a Gen 4 style intake, or any of the Holley Intake Manifolds, they require a "Bolt In" style sensor, which has a larger barb that goes into the intake. These Gen 3 style sensors will NOT fit these intake manifolds. You may remove the rubber seal from the sensor and connect it to the manifold via a hose. We offer Gen 4 style sensors, though. Our Gen 4 bolt-in 4 Bar sensor can be found here!
Tick Performance TPMAP3T
Parts sourced to make these sensors are from:
- California, USA
- Ontario, CANADA
- Virginia, USA
- Wenzhou, CHINA