#SMI-MAP3C

Plug and Play 3 BAR MAP sensor for GEN 3 LS Car Style Intakes LS1, LS2, LS6, LS7
Same scale as Holley 554-107 0-315 KPA. This sensor reads up to 31lbs of boost!!

Compatible with Holley Terminator X, Terminator X Max, HP, and Dominator, as well as many other aftermarket and stock EFI Systems.

These sensors are electrically potted for EXTREMELY HARSH CONDITIONS. That means they are filled with a special electronic epoxy that encases all the components of the internal circuitry. This sensor is 100% Guaranteed not to leak, or blow apart in any situation. It takes a pretty hard hit with a hammer to damage these sensors. Trust me, we put them through some rigorous testing!

This sensor is designed for the Gen 3 LS CAR style intakes. It will NOT clip into the retaining slots of an intake designed for the TRUCK style sensors. The 3 BAR MAP sensors for the truck style intakes can be found here! If you have a Gen 4 style intake, or any of the Holley Intake Manifolds, they require a "Bolt In" style sensor, which has a larger barb that goes into the intake. These Gen 3 style sensors will NOT fit these intake manifolds. You may remove the rubber seal from the sensor and connect it to the manifold via a hose. We offer Gen 4 style sensors, though. Our Gen 4 bolt-in 4 Bar sensor can be found here!

Tick Performance TPMAP3C

Parts sourced to make these sensors are from:

1. California, USA
2. Ontario, CANADA
3. Virginia, USA
4. Wenzhou, CHINA