Have a late-model GM truck or SUV that requires more fuel? We offer this simple plug-and-play Hot-Wire Fuel Pump harness which uses the stock fuse box for an easy and factory-appearing installation. This pre-made harness can withstand high-heat and and high current!
This Hot-Wire Fuel Pump Kit is designed to make the installation of an aftermarket fuel pump easy and reliable. The kit provides ample current to run most aftermarket in-tank pumps. The kit can also be used with a stock-fuel pump you’d like to run at maximum efficiency. The harness is weather proof and designed to be installed in factory locations, and connects to the factory fuse box, using a pre-existing fuse cavity.
Installation:
The harness simply plugs into the stock fuel pump harness plug, and the relay mounts onto a factory frame bracket (see instructions). The power lead wire simply routes to the under-hood fuse box, and plugs in with the ring terminal supplied in the kit. Install the terminal end into the fuse box, plug in the supplied fuse and you’re done! This provides a simple, easy, clean, and factory-style installation. No specialty tools required.
For internal tank harness, click here!! #SMI-INT-FP2
Features:
-
Pre-made high-temp and abrasion resistant harness
-
Relay and fuse included
-
Water/Weather proof components
-
Provides needed current for aftermarket fuel pumps
-
Can increase the life of your stock fuel pump
-
Easy installation, and clean wiring harness
-
Reliable and easy to maintain
Kit includes:
-
1x Relay and Harness
-
1x 40amp J-Case Fuse
-
1x 10awg Ring Terminal and Shrink Wrap
-
1x Nut and Bolt
-
Zip Ties
Applications:
-
2004-2011 GM Full Size Truck/SUV
Please Note:
- May not fit L59 Flex-Fuel equipped vehicles
- This will NOT fit 2007-2011 truck that are equipped with a Fuel Pump Control Module. Please check to see what fuel system your truck has before ordering. Easiest way to check, is in the Engine-Fuse Box. If there is a RELAY in the designated "Fuel Pump" location, you have a standard system and can use the hotwire kit. If no relay is present, this kit will NOT work for your application.